Laurel Door Glass
Raise the bar on your home’s curb appeal with a Laurel doorglass. A mix of glass textures with a focal bevel cluster creates a sophisticated and Classic look. Complement your entryway and door hardware with a choice of brass and platinum finishes. Laurel offers a medium-high level of privacy.
Door Glass with Frame Kit
This door glass kit is designed to fit a wide variety of exterior doors manufactured by Therma Tru, Masonite, Jeld-Wen, PlastPro and many others. This kit can be used to either replace existing glass in a door, or to add glass to a door. This kit contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers. The door glass frame set consists of 1 inner and 1 outer high performance, molded plastic frame. The outer frame has an air and water tight, factory applied seal that bonds the frame to the glass. Before ordering, ensure that the existing glass is held in place by raised molding. The guide below provides door glass and frame kit dimensions:
Replacing Glass
Door Material: Steel or Fiberglass
Door Width: 36″, 34″, 32″ and 30″ (+/- 0.75″)
Door Height: 6’8″ and 7’0″ (+/- 0.75″)
Door Thickness: 1.75″
Frame Kit Width: 24″ (+/- 0.25″)
Frame Kit Height: 38″ (+/- 0.25″)
Adding Glass
Door Material: Steel or Fiberglass
Door Width: 36″, 34″, 32″ (+/- 0.75″)
Door Height: 6’8″ and 7’0″ (+/- 0.75″)
Door Thickness: 1.75″
Door Panel: 6 Panel Door and 4 Panel Door
Door Panel Width: 23″ (+/- 0.5″)
Door Panel Height: 37″ (+/- 0.5″)
Typical Industry Names for the Kit
Half Light
Make sure this fitsby entering your model number.
✔️DECORATIVE GLASS DOOR REPLACEMENT FOR A 24″ X 38″ FRAME – This door glass kit will replace an existing door glass panel with outer frame dimensions of 24” x 38” (+/- 0.25”), and a door thickness of 1-3/4”. Perfect replacement for the following existing door glass panels: a) Half Light on a 6’8” door. This kit contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers.
✔️COMPATIBLE WITH STEEL OR FIBERGLASS DOORS – Door glass kits are suitable for particular steel and fiberglass doors, depending on the panel configuration, and they must be 1-3/4″ thick. Make a beautiful home improvement at a fraction of the cost of a new door. This is a great way to extend your door’s lifetime value.
✔️EASY TO INSTALL – Replacement of the same size existing door inserts typically take under an hour. You only need standard tools like safety glasses, drill with a Phillips head bit, and a putty knife. Two people are recommended to tackle this project.
✔️CLASSIC LOOK FOR YOUR HOME’S ENTRANCE- Raise the bar on your home’s curb appeal with a Laurel doorglass. A mix of glass textures with a focal bevel cluster creates a sophisticated look, offering a medium-high level of privacy.
✔️TEMPERED SAFETY GLASS – Produced with a heat-treating process, this glass is stronger than annealed glass (typical window glass).